Autonomous charging Procedure Guide:
1. Take off the charging gun and insert it into the car charging socket;
2. Click the screen to select the charging gun number (gun 1 corresponds to gun A, gun 2 corresponds to gun B, and so on);
2. Click the screen to select the charging gun number (gun 1 corresponds to gun A, gun 2 corresponds to gun B, and so on);
3. Click the charging QR code on the screen or on the device and scan it (if you use it for the first time, please scan the code to register, and pre-recharge after registration, you can start using it);
4. Charge according to the steps prompted by the phone;
5. After charging is completed, pay and settle;
6. After the lock of the charging gun springs up, pull out the charging gun and put it back in the original place.
Charging operation safety precautions:
1. Before connecting the charging gun, ensure that there is no water in the charging port. If there is water, damp and other phenomena do not charge;
2. Do not touch or remove the charging gun during the charging process. The charging gun can only be removed after the charging is finished.
3. If the electric vehicle or charging facility has an emergency such as open fire, abnormal odor or smoke during the charging process, please press the red "emergency stop switch" on the charging pile immediately and notify the station manager urgently;
4. If the vehicle cannot start charging, please check whether the vehicle is a national standard charging port and check whether the vehicle indicates a fault. If there is a fault, please consult the vehicle company, if there is no problem, please restart the vehicle after moving, turn off the engine, reinsert the charging gun and try to start charging again;
5. If you cannot charge normally, please check whether the operation is correct according to the operation prompts, or contact the customer service phone for consultation.
